Advertisement

How to Fix Tiles on Wood and Plywood

How to Fix Tiles on Wood and Plywood there are places on site where you want to highlight, wall with undulation, plywood tabel top with tile of stone finish. where we have to fix tile or stone on to plywood.

fixing with resin based adhesive and silicon cause failure of fixing tile over ply wood, cement sheet and other boards.

for fixing tile over plywood you need an adhesive which can boand over plywood surface and is flexible so that the tile will neither crack nor loose Bond

correct system for fixing tile on plywood will be; you should use waterproof ply wood of 16mm thickness. plywood should be nailed every 2 feet to reduce movement. undulation of the surface should not exceed 2mm.

for fixing 1 feet by 1 feet tile you may use D2TE Adhesive on areas where there will not be contact with water.
for all othere application of bigger tile and stone use R2T category adhesive.

do not use tile or stone bigger than 3 feet.

give joints on every joints of minimum 3mm and fill it with appropriate cement or epoxy grout to fill joints.

for fixing tile size 1 feet by 1 feet and dry area you may use Elastic Eco or equivalent for other tile and italian stone big size you may use Superflex or equivalent

for filling joints with cement grout you may sure fugabella 0-5 or equivalent, for epoxy grout you may use Fugalite or equivalent.

I make videos but you all make me so like this video, comment and share your opinions share this video with people you think this will be useful, don’t forget to subscribe and press the bell icon

You may follow me on twitter @ imranchhutani
In instagram @imran1.chhutani
Facebook page @Kerakoll.Surat
Write me me @ imran1.chhutani@gmail.com

See you in the next video

and at the end Thanks for watching

Fixing Tile,Plywood,Wood,TV Unit,Architect,Design,Interior,fixing Marble,fixing Italian,

Yorum Gönder

0 Yorumlar